pompo ea likhoerekhoereKe pompo e etselitsoeng ka ho khetheha ho sebetsana le likhoerekhoere, metsi a lit?ila le lino tse ling tse nang le likaroloana tse tiileng.

Se latelang se mabapi lepompo ea likhoerekhoereLintlha tse qaqileng mabapi le hore na e sebetsa joang:

1.Mefuta e meholo

• Pompo ea likhoerekhoere e ka tlas'a metsi: Pompo le motlakase li kopantsoe ka moralo 'me li ka qoelisoa ka ho feletseng ka metsing E loketse liliba tse tebileng, matangoana, likamore tse ka tlaase le libaka tse ling.
• Pompo ea likhoerekhoere e it?ebetsang: E na le ts'ebetso ea ho iketsetsa 'me e ka monya metsi ka mor'a ho qala E loketse mekhoa ea likhoerekhoere e behiloeng fat?e.
• Pompo ea likhoerekhoere e sa koaheleng: E entsoe ka likanale tse kholo, e ka sebetsana le likhoerekhoere tse nang le likaroloana tse kholoanyane tse tiileng 'me li loketse ho hloekisa metsi a lit?ila a masepala le a indasteri.

2.Sebopeho sa lisebelisoa

• 'Mele oa pompo:

  • Lintho tse bonahalang: T?epe ea t?epe, t?epe e sa hloekang, polasetiki ea boenjiniere, joalo-joalo.
  • sebopeho: E na le likou tsa ho hula le ho lahla, tse etselitsoeng likanale tse kholo ho thibela ho koala.

• impeller:

  • mofuta: Mofuta o bulehileng, mofuta o bulehileng, mofuta o koetsoeng.
  • Lintho tse bonahalang: T?epe e sa hloekang, t?epe e entsoeng ka t?epe, boronse, joalo-joalo.
  • bophara: Ho ea ka lintlha tsa pompo le litlhoko tsa moralo.

• Motor:

  • mofuta: Enjene ea AC ea mekhahlelo e meraro.
  • matla: Ka tloaelo ho tloha ho li-kilowatts tse seng kae ho ea ho mashome a kilowatts, ho it?etlehile ka litlhoko tsa tsamaiso.
  • Lebelo: Mefuta e tloaelehileng ke 1450-2900 revolutions ka motsotso (rpm).

• Litiiso:

  • mofuta: Setiiso sa mochini, tiiso ea ho paka.
  • Lintho tse bonahalang: Silicon carbide, ceramics, rabara, joalo-joalo.

• Bearing:

  • mofuta: Li-bearings tse thellang, li-bearings tse thellang.
  • Lintho tse bonahalang: t?epe, boronse, joalo-joalo.

• tsamaiso ea taolo:

  • Molaoli oa PLC: E sebelisoa bakeng sa taolo ea logic le ts'ebetso ea data.
  • kutlo: Sensor ea boemo ba metsi, sensor ea khatello, sensor ea mocheso, joalo-joalo.
  • lekhotla la taolo: E sebelisoa bakeng sa t?ebelisano ea khomphutha ea motho ho bonts'a boemo ba sistimi le liparamente.

3.Litekanyetso tsa ts'ebetso

• Phallo(Q):

  • Yuniti: cubic metres ka hora (m?/h) kapa lilithara ka motsotsoana (L/s).
  • Mefuta e tloaelehileng: 10-500 m? / h.

• Phahamisa(H):

  • Yuniti: metara (m).
  • Sebaka se tloaelehileng: limithara tse 5-50.

• Matla(P):

  • Yuniti: kilowatt (kW).
  • Mefuta e tloaelehileng: li-kilowatts tse 'maloa ho isa ho mashome a kilowatts.

• Katleho(n):

  • E bont?a matla a ho fetola matla a pompo, hangata a hlahisoang e le peresente.
  • Mefuta e tloaelehileng: 60% -85%.

• Ka bophara ba karoloana:

  • Yuniti: millimeter (mm).
  • Mefuta e tloaelehileng: 20-100 mm.

• Khatello(P):

  • Yuniti: Pascal (Pa) kapa bar (bar).
  • Mefuta e tloaelehileng: 0.1-0.5 MPa (1-5 bar).

4.Lintlha tsa ts'ebetso ea mosebetsi

• Nako ea ho qala:

  • Nako ea ho tloha ho fumana let?oao la ho qala ho pompo e fihlang lebelo le lekantsoeng hangata ke metsotsoana e seng mekae ho isa ho metsotsoana e mashome.

• bophahamo ba ho monya metsi:

  • Bophahamo bo phahameng boo pompo e ka hulang metsi ho tsoa mohloling oa metsi hangata ke limithara tse 'maloa ho ea ho limithara tse fetang leshome.

• Mokokotlo wa hlooho e phallang:

  • E emela phetoho ea hlooho ea pompo tlas'a litekanyetso tse fapaneng tsa phallo 'me ke pont?o ea bohlokoa ea ts'ebetso ea pompo.

• NPSH (hlooho e monyang e ntle):

  • E bont?a khatello e fokolang e hlokahalang ka lehlakoreng la ho hula la pompo ho thibela cavitation.

5.Molao-motheo oa ho sebetsa

pompo ea likhoerekhoereMolao-motheo oa ho sebetsa haholo-holo o kenyelletsa mehato e latelang:

1. e qalang: Ha boemo ba mokelikeli oa likhoerekhoere bo fihla ho boleng bo behiloeng, sensor ea boemo ba mokelikeli kapa sesebelisoa sa float e tla romela let?oao ebe e qala ka bo eona.pompo ea likhoerekhoere. Ho kenya letsoho ka letsoho ho ka khoneha, hangata ka konopo kapa ho fetola phanele ea taolo.
2. monya metsi:pompo ea likhoerekhoereHo monya likhoerekhoere ho tsoa ho cesspools kapa mehloli e meng ea metsi ka lipeipi tse monyang. Hangata ho kenngoa ha pompo ho na le sefe ho thibela lit?ila tse kholo ho kena 'meleng oa pompo.
3. Chelete e kholo: Ka mor'a hore likhoerekhoere li kene 'meleng oa pompo, matla a centrifugal a hlahisoa ke ho potoloha ha impeller, e leng ho potlakisa le ho hatella phallo ea likhoerekhoere. Moralo le lebelo la impeller li khetholla khatello le phallo ea pompo.
4. phano: Metsi a likhoerekhoere a hatelletsoeng a fetisetsoa tsamaisong ea metsi kapa setsing sa phekolo ka pipe ea ho tsoa.
5. taolo:pompo ea likhoerekhoereHangata e na le li-sensor tsa boemo ba mokelikeli le li-sensor tsa khatello ho lekola boemo ba ts'ebetso ea sistimi. Sistimi ea taolo e ikemetseng e fetola ts'ebetso ea pompo e ipapisitseng le data e tsoang ho li-sensor tsena ho netefatsa khatello e tsitsitseng ea metsi le phallo.
6. Ema: Ha boemo ba likhoerekhoere bo theoha ka tlase ho boleng bo behiloeng kapa sistimi e hlokomela hore drainage ha e sa hlokahala, sistimi ea taolo e tla koala ka bo eona.pompo ea likhoerekhoere. Ho emisa ka letsoho ho ka khoneha, ka konopo kapa ho fetola phanele ea taolo.

6.Maemo a kopo

• Sekepe sa metsi sa masepala:

  • T?oara likhoerekhoere tsa litoropo le metsi a pula ho thibela likhohola tsa litoropo.
  • Mefuta e tloaelehileng: sekhahla sa phallo 100-300 m? / h, hlooho 10-30 metres.

• Phekolo ea metsi a lit?ila ea indasteri:

  • T?oara metsi a lit?ila a hlahisoang nakong ea tlhahiso ea indasteri ho thibela t?ilafalo ea tikoloho.
  • Mefuta e tloaelehileng: sekhahla sa phallo 50-200 m? / h, hlooho 10-40 metres.

• drainage ea sebaka sa kaho:

  • Tlosa metsi le seretse sebakeng sa kaho ho etsa bonnete ba hore ho hahoa hamonate.
  • Mefuta e tloaelehileng: sekhahla sa phallo 20-100 m? / h, hlooho 5-20 metres.

• lelapaphekolo ea likhoerekhoere:

  • T?oara likhoerekhoere tsa ka tlung, joalo ka kichene le drainage ea ntloana, ho thibela t?ilafalo ea tikoloho.
  • Mefuta e tloaelehileng: sekhahla sa phallo 10-50 m?/h, hlooho 5-15 metres.

7.Tlhokomelo le tlhokomelo

• Ho hlahloba kamehla:

  • Lekola boemo ba litiiso, libering le enjene.
  • Lekola ts'ebetso ea litsamaiso tsa taolo le li-sensor.

• hloekile:

  • Kamehla hloekisa lit?ila 'meleng oa pompo le liphaephe ho netefatsa hore metsi a phalla hantle.
  • Hloekisa filthara le impeller.

• ho tlotsa:

  • Lubricate libering le likarolo tse ling tse tsamaeang kamehla.

• teko matha:

  • Etsa liteko tse tloaelehileng ho netefatsa hore pompo e ka qala le ho sebetsa hantle maemong a t?ohanyetso.

Ka lintlha tsena tse qaqileng le liparamente, kutloisiso e pharaletseng e ka ba tengpompo ea likhoerekhoeremolao-motheo oa ts'ebetso le lit?obotsi tsa ts'ebetso bakeng sa khetho e ntle le tlhokomelopompo ea likhoerekhoere.